G.A.S CarboAir 75 Carbon Filter 355mm x 1000mm (6000m3/hr)

G.A.S CarboAir 75 Carbon Filter 355mm x 1000mm (6000m3/hr) Description

G.A.S provide premium air filtration with CarboAir 75 Carbon Filter. This unit provides huge volumes of filtration and is designed to address considerable volumes of air and odours. This unit can double-filter your grow room’s air.

How G.A.S CarboAir 75 Carbon Filter 355mm x 1000mm (6000m3/hr) Works

G.A.S CarboAir 75 functions twofold; one it removes stale, hot air or moisture from the grow room whilst drawing in fresh air. This works to replace CO2 levels and control the climate inside the grow room. This filter connects to the extractor fan whilst air is being tended to. The air is clean and free of odours.

How to use G.A.S CarboAir 75 Carbon Filter 355mm x 1000mm (6000m3/hr)

The Carbon Filter must match the fan in use considering the fan's diameter and airflow rate. If the airflow rate of the fan is far above the filter’s capacity, the air will flow through without being cleaned. Install the filter inside the grow room and attach it to the extractor fan with ducting and duct clips. Install the filter to the extractor fan’s intake side. To prevent damage to the filter keep humidity levels between 40-60%.

G.A.S CarboAir 75 Carbon Filter 355mm x 1000mm (6000m3/hr) Key Features

• Designed with heavy-duty and large grow rooms in mind
• Come in a longer body design to provide a longer contact time between the air and carbon to remove high concentrations of odours
• Pre-filter provided to prevent dust from entering the filter
• 5% open mesh for greater airflow
• 75 mm Pure activated granular carbon bed tested in Europe to air ventilation standards.
• Machinery-packed carbon is compressed with a thick foam collar
• Highly porous carbon specially tailored for CarboAir
• Galvanized steel filter casing
• 2 years lifespan

G.A.S CarboAir 75 Carbon Filter 355mm x 1000mm (6000m3/hr) Specification, Dimensions & Air Flows

• Dimensions: 355m x 1000mm
• Airflow: 6000m3/hr